Outdoor space heating can keep the profits coming from outdoor commercial areas or extend the party season for a home patio despite cold weather. Infratech uses infrared energy to efficiently provide heat with pinpoint accuracy virtually anywhere its desired. And, INFRATUBE is completely safe, emitting only warm radiant energy. All INFRATUBEs are UL listed. INFRATUBE Comfort Heat combines maximum efficiency, easier installation, lower cost, and higher ROI to provide you the ultimate outdoor and indoor heating solution. You and your customers may never have to move indoors again.

• Maximum efficiency
• Suitable heat for indoors and outdoors
• Provides spot heat to exposed areas
• Simple low cost installation
• Available in stainless steel or standard powder beige coated finish
• UL listed
• No moving parts, low maintenance
• One year factory warranty
• Heats a 8 x 8 for area when mounted 10+ feet high
• 4000 watts with 240 volts, 16.7 Amps 
• Electric Infrared Heaters are not affected by wind. No open flame burner.
• No emissions produced, making it easy to install underneath canvas or wood.
• Equipped with 6" Mounting Kit
• Electric Infrared Heaters can be flush mounted with special frames.
• Minimal Maintenance Required
• Electric Heaters are energy efficient
• Low Operating Cost. For Example, A typical 3Kw (3000 Watt) Electric Heater Cost $0.36 Per hour. If Operated for three hours it would cost $1.08 (will vary by area)
• Infratech produced with pride in the USA.

Specifications:

Height:	6" x 6" x 61 inches
Reflector Diameter:	60" concave internal reflector
Burner Materials:	All Stainless Steel Construction
Emitter Grid Materials:	Heavy duty series 430 stainless steel
Fasteners:	Series 304 stainless steel
Finish Colors:	Beige or Commerical Grade Stainless Steel
BTU Input/Hour:	13,648 BTU/Hour
Reflector Clearances:	18" from sides, 6" from rear, 6" from ceiling, 72" min. below
Base Diameter:	N/A
Net Weight:	20 pounds
Circle of Heat:	8' x 8' area (Will vary based on wind chill factor, prevailing winds, location of heater, wind protection)
Burn Time:	Constant supply on 240 Volt Electrical, 16.7 Amps
Gas Supply:	The unit is designed for electricity only
Safety Systems:	100% safety shut-off
Product Approval:	UL Listed
Installation:	Installation must conform to local codes and ordinances. Please check with local fire, code, or safety officials if you have any questions as to the suitability or acceptability of this heating appliance. Click here for Owner’s Manual. (pdf .75 MB).
Residential Warranty:	One year Warranty

* UL or CSA Certified waterproof use junction box to be supplied by electrician